-
Third Party APs: Refer to
•
802.11: Refer to
•
802.11a: Click the menu title to reveal menu selections.
-
Parameters: Refer to
-
RRM Thresholds: Refer to
-
RRM Intervals: Refer to
-
RRM Radio Grouping: Refer to
•
802.11b/g: Click the menu title to reveal menu selections.
-
802.11b/g Parameters: Refer to
-
RRM Thresholds: Refer to
-
RRM Intervals: Refer to
-
RRM Radio Grouping: Refer to
•
Ports: Refer to
•
Control: Click the menu title to reveal menu selections.
-
Trap Control: Refer to
-
Telnet SSH: Refer to
-
Syslog: Refer to
-
WEB Admin: Refer to
Configure <IPaddr> > Interface Edit
Use CONFIGURE/Switches, click an IP address under the IP Address column, on the left sidebar
menu select System and click Interfaces, from the Interface Name column, select the Interface you
wish to edit.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
This page allows you to edit an interface description.
•
Interface Name: User-defined name for this interface, for example, management, service-port,
virtual (read only).
•
MAC Address: Burned-in MAC address of the Management Interface.
•
Interface Address:
-
VLAN ID: 1 through 4096, 0 for untagged.
-
IP Address: IP Address of the interface.
-
Netmask: Netmask of the interface.
-
Gateway: Gateway address of the interface.
•
Physical Information:
-
Port Number: Interface port number.
•
DHCP Information:
-
Primary DHCP Server: IP Address of the primary DHCP server.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 202
Configure <IPaddr> > Connected Third Party
Configure <IPaddr> > Switch
Configure <IPaddr> > 802.11a
Configure <IPaddr> > 802.11a RRM
Configure <IPaddr> > 802.11a RRM
Configure <IPaddr> > 802.11b/g RRM
Configure <IPaddr> > 802.11b/g RRM
Configure <IPaddr> >
Configure <IPaddr> > Trap
Configure <IPaddr> > Telnet SSH
Configure <IPaddr> > Syslog
Configure <IPaddr> > WEB
Configure <IPaddr> > Interface Edit
802.11.
Configure <IPaddr> > 802.11a Grouping
Configure <IPaddr> > 802.11b/g
Configure <IPaddr> > 802.11b/g RRM Grouping
Ports.
Controls.
Configuration.
Admin.
Configure <IPaddr> > Interface Edit
AP.
Parameters.
Thresholds.
Intervals.
Control.
Parameters.
Thresholds.
Intervals.
Configuration.
Control.
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?