Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan mac-filtering [enable/disable] [<WLAN id>/foreignAp]
Syntax
Defaults
Examples
Related Commands
config wlan qos
config wlan qos
To change the quality of service for a wireless LAN, use the config wlan qos command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan qos [<WLAN id>/foreignAp] [bronze/silver/gold]
Syntax
Defaults
Examples
Related Commands
config wlan radio
config wlan radio
To the set the OmniAccess Radio policy on a wireless LAN, use the config wlan radio command. Set the
WLAN policy to apply to 802.11a, 802.11g, 802.11b, 802.11a/g, 802.11b/g, or All = 802.11a/b/g
OmniAccess Radios.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan radio <WLAN id> [all/802.11a/802.11bg/802.11g/802.11ag]
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 157
config
wlan
mac-filtering
enable/disable
<WLAN id>
foreignAp
(none)
>config wlan mac-filtering enable 1
show wlan
config
wlan
qos
<WLAN id>
foreignAp
bronze/silver/gold
(none)
To set the highest level of service on WLAN 1, use the following command:
>config wlan qos 1 gold
To set a lower level of service for Third-Party APs, use the following command:
>config wlan qos foreignAp bronze
show wlan
config
Configure parameters.
Wireless LAN parameters.
MAC filtering feature.
Change state command.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Configure parameters.
Wireless LAN parameters.
Quality of service.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Grades of service.
Configure parameters.
config wlan qos
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?