Examples
Related Commands
config wlan delete
To delete a wireless LAN, use the config wlan delete command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan delete [<WLAN id>/foreignAp]
Syntax
Defaults
Examples
Related Commands
config wlan dhcp_server
To configure the DHCP server for a wireless LAN, use the config wlan dhcp_server command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide in the Alcatel Omni-
Access Wireless Product Guide does not support WLANs or Third-Party APs.
>config wlan dhcp_server [<WLAN id>/foreignAp] <ipaddr>
Syntax
Defaults
Examples
Related Commands
config wlan disable
To disable a wireless LAN, use the config wlan disable command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan disable [<WLAN id>/foreignAp]
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 155
>config wlan create 1 SSID01
show trapflags
config wlan delete
config
wlan
delete
<WLAN id>
foreignAp
(none)
>config wlan delete foreignAp
show wlan, show wlan summary
config wlan dhcp_server
config
wlan
dhcp_server
<WLAN id>
foreignAp
<ipaddr>
(none)
>config wlan dhcp_server foreignAp 10.10.2.1
show wlan
config wlan disable
config
Configure parameters.
Wireless LAN parameters.
Remove a WLAN.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Configure parameters.
Wireless LAN parameters.
Configure DHCP server.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
IP Address of the DHCP server
Configure parameters.
config wlan delete
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?