TFTP Path...................................... <directory path>
TFTP Filename..................................
Are you sure you want to start? (y/n)
Transfer Canceled
•
To change the download settings, use the following:
transfer download mode tftp
>
transfer download datatype webauthcert
>
transfer download serverip <TFTP server IP address>
>
transfer download path <absolute TFTP server path to the update file>
>
transfer download filename <webadmincert_name>.pem
>
Note:
address>, and the TFTP server automatically determines the path to the correct
directory.
•
Enter the password for the .PEM file, so Alcatel OmniAccess Operating System can decrypt the
Web Administration SSL key and certificate:
transfer download certpassword <private_key_password>
>
>Setting password to <private_key_password>
•
In the CLI, use the transfer download start command to view the updated settings, and
answer 'y' to the prompt to confirm the current download settings and start the certificate and
key download:
transfer download start
>
Mode........................................... TFTP
Data Type...................................... Site Cert
TFTP Server IP................................. xxx.xxx.xxx.xxx
TFTP Path...................................... <directory path>
TFTP Filename.................................. <webadmincert_name>
Are you sure you want to start? (y/n)
TFTP Webadmin cert transfer starting.
Certificate installed.
Please restart the switch (reset system) to use the new certificate.
•
Verify that the Web Administration certificate is properly loaded:
show certificate summary
>
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off
•
Enable Secure Web mode:
config network secureweb enable
>
•
Save the SSL certificate, key and secure web password in active working memory to NVRAM
(non-volatile RAM) so your changes are retained across reboots:
save config
>
Are you sure you want to save? (y/n)
Configuration Saved!
•
Reboot the Alcatel OmniAccess Switch or Appliance:
reset system
>
11/5/04
Adding SSL to the Alcatel OmniAccess Switch Web Interface
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 127
Some TFTP servers require only a forward slash "/" as the <TFTP server IP
n
y
y
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?
Questions and answers