Show Ap Stats - Alcatel OmniAccess Wireless System 2.1 Product Manual

Related Commands

show ap stats

show ap stats
To display the statistics for an 802.11b/g OmniAccess AP 1200 or 1250, use the show ap stats
command.
show ap stats <802.11a/802.11b> <AP name>
>
Syntax
Defaults
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 21
Phy DSSS parameters
Configuration.............................. AUTOMATIC
Current Channel............................ 1
Current CCA Mode........................... 0
ED Threshold............................... -50
Antenna Type............................... EXTERNAL_ANTENNA
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration.............................. AUTOMATIC
Interference threshold..................... 10%
Noise threshold............................
RF utilization threshold................... 80%
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25%
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
show ap config general AP1
>
OmniAccess AP 1200 or 1250 Identifier.......................... 5
OmniAccess AP 1200 or 1250 Name................................ AP01
AP Type.......................................... Alcatel
Switch Port Number............................... 19
MAC Address...................................... 00:0b:85:01:05:00
IP Address....................................... Disabled
OmniAccess AP 1200 or 1250 Location............................ default
location
Primary Switch...................................
Administrative State............................. ADMIN_ENABLED
Operation State.................................. REGISTERED
Mirroring Mode................................... Disabled
AP Mode.......................................... Local
Remote AP Debug.................................. Disabled
S/W Version..................................... 2.0.133.0
Boot Version.................................... 0.0.0.0
Stats Reporting Period........................... 180
Number Of Slots.................................. 2
Rad Model........................................
Rad Serial Number................................ 01012203-10057105-01182
config 802.11a antenna, config 802.11b antenna, config cell
show
ap
<802.11a/802.11b>
<AP name>
(none)
Display configurations.
OmniAccess Radio.
802.11a or 802.11b/g statistics.
OmniAccess AP 1200 or 1250 name.
show ap stats
-70 dBm