Snmp System Summary - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
Summary Parameters (Continued)
Parameter
Syslog
HTTP Mode
HTTPS Mode
New Telnet Sessions Allowed
New SSH Sessions Allowed
Management via Wireless
Command Buttons
•
Help: Request that the help page be displayed in a new browser window.

SNMP System Summary

Use MANAGEMENT/SNMP/General to navigate to this page.
This page allows you to change some of the SNMP system parameters.
Table -
SNMP System Parameters
Parameter
Name
Location
Contact
System Description
System Object ID
SNMP Port Number
Trap Port Number
SNMP v1 Mode
SNMP v2c Mode
SNMP v3 Mode
Command Buttons
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 106
Log of system events.
Access mode for web and secure web.
Enable or Disable the https Secure Shell (SSL) interface using secure
certificate authentication
Whether or not additional telnet sessions are permitted.
Whether or not additional SSH-enabled sessions are permitted.
Whether Alcatel OmniAccess Switch or Appliance management from
a wireless client is enabled or disabled.
SNMP System Summary
Customer definable name of the Alcatel OmniAccess Switch or Appliance.
Customer definable Alcatel OmniAccess Switch or Appliance location.
Customer definable contact details.
Read-only Alcatel OmniAccess Switch or Appliance description.
Read-only object ID.
Read-only SNMP port number.
Definable trap port number; Default is 162.
Enable or disable SNMP v1; Default is disable.
Enable or disable SNMP v2c; Default is disable.
Enable or disable SNMP v3; Default is enable.
Description
Description
SNMP System Summary