Monitor Switches > <Ipaddr> > 802.11B/G Rrm Groups - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
Station Configuration Parameters (Continued)
Parameter
DTIM Period
Table -
Tx Power Parameter
Parameter
Max Tx Power Level
Table -
Physical Channel Parameters
Parameter
ED Threshold
Channel Agility Enabled
Table -
Multi-Domain Capability
Parameter
First Channel Number
Number of Channels
Monitor Switches > <IPaddr> > 802.11b/g RRM Groups
Use MONITOR/Switches and click one of the IP addresses under IP Address, then from the Sidebar
menu, under 802.11b/g, select RRM Grouping or WPS Grouping to access this page.
Use MONITOR/Access Points, click a list item under AP Name, click Registered Switch, then from
the Sidebar menu, under 802.11b/g, select RRM Grouping to access this page.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 64
The number of beacon intervals that shall elapse between transmission of
Beacon frames containing a TIM element whose DTIM Count field is 0.
This value is transmitted in the DTIM Period field of Beacon frames. Note
that the Standalone WPS Alcatel OmniAccess Wireless System described
in About the Alcatel OmniAccess Wireless System in the Alcatel Omni-
Access Wireless Product Guide does not support WLANs or DTIM
parameters.
OmniAccess AP 1200 or 1250 transmit power level (1 = Maximum power
allowed per Country Code setting, 2 = 50% power, 3 = 25% power, 4 =
12.5% power, and 5 = 6.25% power). Note that the power levels and
available channels are defined by the Country Code setting, and are
regulated on a country by country basis. Refer to Supported Regulatory
Domains in the Alcatel OmniAccess Wireless Product Guide for the
maximum Transmit Power Levels for each country.
The Energy Detect and Threshold being used to detect a busy medium
(frequency). CCA shall report a busy medium upon detecting the RSSI
above this threshold.
Physical channel agility functionality is or is not implemented.
The value of the lowest channel number in the subband for the associated
domain country string.
The value of the total number of channels allowed in the subband for the
associated domain country string.
Monitor Switches > <IPaddr> > 802.11b/g RRM Groups
Description
Description
Description
Description
Monitor Switches > <IPaddr> > 802.11b/g RRM Groups