Table of Contents
Advertisement
Examples
Related Commands
show time
show time
To a show the Alcatel OmniAccess Switch or Appliance time and date, use the show time command.
>show time
Syntax
Defaults
Examples
Related Commands
show trapflags
show trapflags
To a show the Alcatel OmniAccess Switch or Appliance SNMP trap flags, use the show trapflags
command.
>show trapflags
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 54
>show tech-support
Current CPU Load................................. 0%
System Buffers
Max Free Buffers.............................. 4608
Free Buffers.................................. 4604
Buffers In Use................................ 4
Web Server Resources
Descriptors Allocated......................... 152
Descriptors Used.............................. 3
Segments Allocated............................ 152
Segments Used................................. 3
(none)
show
time
(none)
>show time
Time........................................... Sun Aug 10 03:04:51 2004
Timezone delta................................. 0:0
Daylight savings............................... disabled
NTP Servers
NTP Polling Interval................... 86400
Index NTP Server
----- ----------
config time
show
trapflags
(none)
>show trapflags
Authentication Flag............................ Enable
Link Up/Down Flag.............................. Enable
Multiple Users Flag............................ Enable
Spanning Tree Flag............................. Enable
Display configurations.
Alcatel OmniAccess Switch or Appliance time and
date.
Display configurations.
Alcatel OmniAccess Switch or Appliance SNMP trap
flags.
show time
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?