Alcatel OmniAccess Wireless System 2.1 Product Manual page 513

Table -
Station Configuration Parameters (Continued)
Parameters
DTIM Period
Country String
Table -
Operation Rate Set for 802.11a OmniAccess Radios
Parameter
6000 Kilo Bits
9000 Kilo Bits
12000 Kilo Bits
18000 Kilo Bits
24000 Kilo Bits
36000 Kilo Bits
48000 Kilo Bits
54000 Kilo Bits
The data rates set here are negotiated between the client and the Alcatel OmniAccess Switch
Note:
or Appliance. If the data rate is set to Mandatory, the client must support it in order to use the
network.
If a data rate is set as Supported by the Alcatel OmniAccess Switch or Appliance, any associated
client that also supports that same rate may communicate with the OmniAccess AP 1200 or 1250
using that rate. But it is not required that a client be able to use all the rates marked Supported in
order to associate. Each data rate can also be set to Disabled to match Client settings.
Table -
MAC Operation Parameters
Parameter
Configuration Type
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 64
The number of beacon intervals that shall elapse between transmission of
Beacon frames containing a TIM element whose DTIM Count field is 0.
This value is transmitted in the DTIM Period field of Beacon frames. Note
that the Standalone WPS Alcatel OmniAccess Wireless System described
in About the Alcatel OmniAccess Wireless System in the Alcatel Omni-
Access Wireless Product Guide does not support WLANs or DTIM
parameters.
Identifies the country in which the station is operating. The first two
octets of this string is the two character country code as described in
Alcatel OmniAccess Wireless System Supported Regulatory Domains in
the Alcatel OmniAccess Wireless Product Guide.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Mandatory, Supported or Disabled.
Automatic or Custom.
Description
Range (Note)
Description
802.11a AP Interfaces > Details