Config Advanced 802.11A Profile Level; Config Advanced 802.11A Profile Noise; Config Advanced 802.11A Profile Throughput - Alcatel OmniAccess Wireless System 2.1 Product Manual

config advanced 802.11a profile level

To set the OmniAccess AP 1200 or 1250 client minimum exception level between 1 and 75 clients, use
the config advanced 802.11a profile level command.
>config advanced 802.11a profile level <global/OmniAccess AP 1200 or 1250>
<value>
Syntax
Defaults
Examples
Related Commands

config advanced 802.11a profile noise

To set the 802.11a foreign noise threshold between -127 and 0 dBm, use the config advanced 802.11a
profile noise command.
config advanced 802.11a profile noise <global/OmniAccess AP 1200 or 1250>
>
<value>
Syntax
Defaults
Examples
Related Commands

config advanced 802.11a profile throughput

To set the OmniAccess AP 1200 or 1250 data-rate throughput threshold between 1000 and 10000000
bytes per second, use the config advanced 802.11a profile throughput command.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 83
config
advanced 802.11a
profile level
global/<OmniAccess AP 1200 or 1250>global or OmniAccess AP 1200 or 1250
<value>
3 clients.
>config advanced 802.11a profile level global 10
to set all OmniAccess AP 1200 or 1250 client minimum exception levels to 10
clients.
>config advanced 802.11a profile level AP1 25
to set the AP1 client minimum exception level to 25 clients.
show advanced 802.11a profile, config advanced 802.11b profile level
config
advanced 802.11a
profile noise
global/<OmniAccess AP 1200 or 1250>global or OmniAccess AP 1200 or 1250
<value>
-70 dBm.
To set the 802.11a foreign noise threshold for all OmniAccess AP Access Points
to -127 dBm:
>config advanced 802.11a profile noise global -127
To set the 802.11a foreign noise threshold for AP1 to 0 dBm:
>config advanced 802.11a profile noise AP1 0
show advanced 802.11a profile, config advanced 802.11b profile noise
config advanced 802.11a profile level
config advanced 802.11a profile level
Configure parameters.
Advanced 802.11a parameters.
OmniAccess AP 1200 or 1250 profile level
specific profile.
1 to 75 clients.
config advanced 802.11a profile noise
Configure parameters.
Advanced 802.11a parameters.
Profile noise limits
specific profile.
-127 to 0 dBm.
config advanced 802.11a profile throughput