Related Commands
show switchconfig
To a show the network (DS Port) 802.3x flow control mode, use the show switchconfig command.
>show switchconfig
Syntax
Defaults
Examples
Related Commands
show sysinfo
show sysinfo
To a show high-level Alcatel OmniAccess Switch or Appliance information, use the show sysinfo
command.
>show sysinfo
Syntax
Defaults
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 52
RECEIVE
Octets......................................... 13973582
Total Pkts..................................... 136441
Unicast Pkts................................... 117636
Multicast Pkts................................. 0
Broadcast Pkts................................. 18805
Pkts Discarded................................. 0
TRANSMIT
Octets......................................... 5919784
Total Pkts..................................... 78028
Unicast Pkts................................... 33448
Multicast Pkts................................. 41240
Broadcast Pkts................................. 3340
Pkts Discarded................................. 2
ADDRESS ENTRIES
Most Ever Used................................. 26
Currently In Use............................... 26
VLAN ENTRIES
Maximum........................................ 128
Most Ever Used................................. 1
Static In Use.................................. 1
Dynamic In Use................................. 0
VLANs Deleted.................................. 0
Time Since Ctrs Last Cleared................... 2 day 11 hr 23 min 43 sec
config network dsport
show switchconfig
show
switchconfig
(none)
>show switchconfig
802.3x Flow Control Mode....................... Disable
Current LWAPP Transport Mode................... Layer 2
LWAPP Transport Mode after next switch reboot . Layer 2
config switchconfig flowcontrol, config switchconfig mode
show
sysinfo
(none)
Display configurations.
Alcatel OmniAccess Switch or Appliance
configuration.
Display configurations.
Alcatel OmniAccess Switch or Appliance information.
show switchconfig