Alcatel OmniAccess Wireless System 2.1 Product Manual page 462

Table -
Received Packets Not Forwarded (Continued)
Parameter
802.3x Pause Frames Received
Unacceptable Frame Type
VLAN Membership Mismatch
VLAN Viable Discards
Multicast Tree Viable Discards
Reserved Address Discards
CFI Discards
Upstream Threshold
Table -
Transmit Errors
Parameter
Total Errors
FCS Errors
Oversized
Underrun Errors
Table -
Transmit Discards
Parameter
Total Discards
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 13
A count of MAC Control frames received on this interface with an
opcode indicating the PAUSE operation. This counter does not
increment when the interface operates in half-duplex mode.
The number of frames discarded from this port due to being an
unacceptable frame type.
The number of frames discarded on this port due to ingress
filtering.
The number of frames discarded on this port when a lookup on a
particular VLAN occurs while that entry in the VLAN table is being
modified, or if the VLAN has not been configured.
The number of frames discarded when a lookup in the multicast
tree for a VLAN occurs while that tree is being modified.
The number of frames discarded that are destined to an IEEE
802.1 reserved address and are not supported by the system.
The number of frames discarded that have CFI bit set and the
addresses in RIF are in non-canonical format.
The number of frames discarded due to lack of cell descriptors
available for that packet's priority level.
The sum of Single, Multiple, and Excessive Collisions.
The total number of packets transmitted that had a length
(excluding framing bits, but including FCS octets) of between 64
and 1518 octets, inclusive, but had a bad Frame Check Sequence
(FCS) with an integral number of octets.
The total number of frames that exceeded the maximum
permitted frame size. This counter has a maximum increment rate
of 815 counts per second at 10 Mbps.
The total number of frames discarded because the transmit FIFO
buffer became empty during frame transmission.
The sum of single collision frames discarded, multiple collision
frames discarded, and excessive frames discarded.
Description
Description
Description
Ports > Statistics