Configure Telnet Ssh Configuration > New Template - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
IP Security Traps (Continued)
Trap Name
IKE Negotiation Failure
IKE Suite Failure
Invalid Cookie
Table -
802.11 Security Traps
Trap Name
WEP Decrypt Error
Table -
WPS Traps
Trap Name
Rogue Auto
Containment
Command Buttons
•
Save
•
Cancel
Configure Telnet SSH Configuration > New Template
Use CONFIGURE/Templates, and from the left sidebar menu under Management select Telnet
SSH, then select Add Template to access this page.
This page allows you to add a new Telnet SSH configuration template.
Table -
New SSH Configuration Template
Parameter
Template Name
Session Timeout (min)
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 162
An attempt to negotiate a phase 1 IKE SA failed. The notification counts
are also sent as part of the trap, along with the current value of the total
negotiation error counters.
An attempt to negotiate a phase 2 SA suite for the specified selector
failed. The current total failure counts are passed as well as the notifi-
cation type counts for the notify involved in the failure.
ISAKMP packets with invalid cookies were detected from the specified
source, intended for the specified destination. The initiator and responder
cookies are also sent with the trap.
Notification sent when the Alcatel OmniAccess Switch or Appliance detects
a WEP decrypting error.
Notification sent when a rogue AP is auto-contained.
User-defined name of this new template.
Indicates the number of minutes a Telnet session is allowed to remain
inactive before being logged off. A zero means there will be no timeout.
May be specified as a number from 0 to 160. The factory default is 5.
Configure Telnet SSH Configuration > New Template
Description
Description
Description
Configure Telnet SSH Configuration > New Template
Description