Monitor Access Points > <Name> > <Radio Type - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
Inventory Information (Continued)
Parameter
AP Serial Number
•
Alarms: Go to
•
Events: Go to
Monitor Access Points > <name> > <radio type>
Use MONITOR/Access Points and click a list item under Radio to access this page.
Use MONITOR/Maps, then click an item in the Name column, then click an OmniAccess AP 1200 or
1250 icon to access this page.
Use MONITOR/Access Points and click a list item under AP Name, click 802.11a or 802.11b under AP
Interfaces to access this page.
This page allows you to view access point information for a single 802.11a or 802.11b/g OmniAccess
Radio.
The default is to show On Demand Statistics. Use the View pulldown menu to select a different view:
•
Select On Demand Statistics and click GO to display
•
Select Operational Parameters and click GO to display
•
Select 802.11 MAC Counters and click GO to display
•
Select View Alarms and click GO to display
•
Select View Events and click GO to display
On Demand Statistics
From Monitor Access Points > <name> > <radio
access this page.
This page allows you to view access point 802.11a or 802.11b OmniAccess Radio statistics for a single
OmniAccess AP 1200 or 1250.
Table -
General
Parameter
AP Name
AP MAC Address
Radio
Admin Status
Operational Status
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 75
Unique Serial Number for this Access Point.
Monitor Alarms.
Monitor Alarm > Events.
On Demand Statistics
This is the name assigned to the OmniAccess AP 1200 or 1250. Click to
view the OmniAccess AP 1200 or 1250 parameters in
Points > <name>.
Media Access Control address of the OmniAccess AP 1200 or 1250.
Protocol of the rogue access point is either 802.11a, 802.11b or 802.11g.
Click a list item for details. Refer to
Point > <name> >
Administration state of the OmniAccess AP 1200 or 1250 (Enable or
Disabled).
Displays the operational status of the OmniAccess Radios (Up or Down).
Monitor Access Points > <name> > <radio type>
Description
Monitor Access Points > <name> > <radio type>
On Demand
Operational
802.11 MAC
Monitor Alarms.
Monitor Alarm > Events.
type>, select On Demand Statistics and click GO to
Description
Configure Access Points > Access
802.11a.
Statistics.
Parameters.
Counters.
Monitor Access