Alcatel OmniAccess Wireless System 2.1 Product Manual page 992

2.
Click Start > Settings > Network Connections.
If the driver version number is lower than the one listed in
update the driver.
3.
Right-click an appropriate Wireless Connection in the list and select Properties.
4.
Click the Driver tab sheet, then the Update Driver button.
The figure below shows Wireless Adapter Properties dialog on Windows XP. The driver version number
must be same or higher than specified in
The figure below shows the Hardware Update Wizard on Windows XP.
•
Click Install from a list or specific location, then Next.
•
Browse to C:\Program Files\Alcatel\Site Survey\Drivers and select the appropriate driver
for your adapter. Refer to
•
Click Next to install the new driver, then Finish to exit the Hardware Update Wizard.
The figure below shows the Hardware Update Wizard completed on Windows XP.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide
Supported Adapters.
Supported Adapters to see which driver works with your adapter.
Updating the WLAN Adapter Driver
Supported Adapters, you must
7