Alcatel OmniAccess Wireless System 2.1 Product Manual page 225

•
In the Installer/About to Install window, click Next.
•
In the Installer window, select the default /usr/local/bin/ACS21 (or any other) directory.
Click Install.
Note:
No, navigate to the .
subdirectories and files (rm -Rf webnms, for example), and continue with the
installation.
The install script copies the ACS Software files to the selected directory and verifies them.
•
The install script displays
•
The install script completes the installation and displays
Select Finished to close down the install script.
Restore the ACS Server Database
•
Navigate to the default /usr/local/bin/ACS21 directory (or the directory chosen during
installation).
•
Enter ./Restore to start the ACS Software database backup. The Backup script displays the
Select Backup directory window.
•
In the Select Backup directory window, navigate to the NAME of the backup directory you
created above (not IN the directory), and click OK.
•
When the Backup script displays
Start the ACS Server Application
•
In the /usr/local/bin/ACS21 directory (or the directory chosen during installation).
•
Enter ./StartACSServer to start th e ACS Software application.
•
Enter ./CheckServerStatus to open the ACS Server Status window.
•
When the Start ACS Server Status window displays
clients (ACS Web Interfaces) using Http Port: 80 or Https Port: 433
HTTPS: port you selected in the Install the New ACS Server Application step), the ACS Software
has started and is ready to host ACS Web Interfaces.
CAUTION:
Stopping Linux ACS
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 184
If you receive the
/usr/local/bin/ACS21 exists. Use it anyway?
/usr/local/bin/ACS21
Checking for Port Availability. Click Next to continue
You may restart the ACS Server now,
When you plan to shut down the ACS Software, refer to
Software.
directory and delete any remaining
You may restart the ACS Server now
ACS Server is up. Please connect your
Updating the Linux ACS Software
message, click
. Click Next.
.
click OK.
(or whichever HTTP: or
Starting and