Related Commands
show rogue adhoc summary
To display a summary of the adhoc rogues detected by the Alcatel OmniAccess Switch or Appliance, use
the show rogue adhoc summary command.
>show rogue adhoc summary
Syntax
Defaults
Examples
Related Commands
SHOW ROGUE CLIENT COMMANDS
Use the following Rogue Client commands:
•
show rogue client detailed
•
show rogue client summary
show rogue client detailed
To show details of a rogue client detected by the Alcatel OmniAccess Switch or Appliance, use the show
rogue client detailed command.
>show rogue client detailed <MAC address>
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 43
Channel................................ 6
RSSI................................... -60 dBm
SNR.................................... 40 dB
show rogue adhoc summary
show rogue adhoc summary
show
rogue adhoc
summary
(none)
>show rogue adhoc summary
Adhoc Rogue Location Discovery Protocol..........
RLDP Auto-Contain................................
Adhoc Rogue MAC Address
-----------------------
00:02:6d:28:37:ab
Alert
00:09:6b:54:23:90
Alert
00:0b:65:00:80:40
Alert
show rogue adhoc detailed
show rogue client
show rogue client detailed
show
rogue client
detailed
<MAC address>
(none)
show rogue client detailed 00:40:96:90:d1:6a
>
Rogue Client MAC Address....................... 00:40:96:90:d1:6a
State.......................................... Alert
First Time Rogue Client was Reported........... Sat Aug
Last Time Rogue Client was Reported............ Sat Aug
Display configurations.
Adhoc Rogue.
Summary information.
State
# APs Last Heard
-----
-----------------------
1
Sat Aug
1
Sat Aug
1
Sat Aug
Display configurations.
Rogue client.
Summary information.
Rogue client MAC address.
show rogue adhoc summary
Disabled
Disabled
9 21:12:50 2004
9 21:12:50 2003
9 21:10:50 2003
9 15:48:50 2003
9 21:16:50 2003
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?