Reset To Factory Default; Set Time - Alcatel OmniAccess Wireless System 2.1 Product Manual

Command Buttons
•
Reboot: Restart the Alcatel OmniAccess Switch or Appliance.
•
Help: Request that the help page be displayed in a new browser window.

Reset to Factory Default

Use COMMANDS/Reset to Factory Default to navigate to this page.
This page allows you to reset the Alcatel OmniAccess Switch or Appliance configuration to the factory
default. This overwrites all applied and saved configuration parameters! You are prompted for confir-
mation to re-initialize your Alcatel OmniAccess Switch or Appliance.
All configuration data files are deleted, and upon reboot, the Alcatel OmniAccess Switch or Appliance is
restored to its original unconfigured state. This removes all IP configuration, and you need a serial
connection to restore its base configuration.
Note:
Access Switch or Appliance and select the "Reboot Without Saving" option.
CAUTION:
the Alcatel OmniAccess Wireless Product Guide!
Command Buttons
•
Reset: Return configuration to factory default.
•
Help: Request that the help page be displayed in a new browser window.

Set Time

Set Time
Use COMMANDS/Set Time to navigate to this page.
Use this page to set the current time and date on the Alcatel OmniAccess Switch or Appliance. Select
the date and time from the drop-down menus and select Apply.
Command Buttons
•
Set Date and Time
•
Set Timezone
•
Help: Request that the help page be displayed in a new browser window.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 124
Reset to Factory Default
After confirming configuration removal, you must reboot the Alcatel Omni-
Have a serial session active to complete Startup Wizard as described in
Reset to Factory Default