Alcatel OmniAccess Wireless System 2.1 Product Manual page 222

Note:
script will generate error messages.
•
From the Windows START button, select the Programs menu, and then select Alcatel
OmniAccess Control System 2.1/Backup.
The backup script opens the Backup DOS window and the Select Backup directory window.
•
In the Select Backup directory window, highlight the backup directory you created above and
click OK.
The backup database script creates subdirectories in the C:\ACS21_Backup\ directory, and
backs up the ACS Software database and the floor plan, building, and area maps to the
C:\ACS21_Backup\conf and C:\ACS21_Backup\mapimages directories.
•
When the Backup Status window opens and displays the
the ACS Server now.
•
Uninstall the Alcatel OmniAccess Control System Software application using the Control
Panel/Add or Remove Programs application.
•
When the JExpress Uninstaller window displays
to close the JExpress Uninstaller window.
•
If any part of the C:\Program Files\ACS21 folder remains on the hard drive, manually delete
the folder and all contents.
Note:
following error message upon reinstall:
uninstall the older version before installing this version.
•
Reinstall the ACS Software application as described in
•
From the Windows START button, select the Programs menu, and then select Alcatel
OmniAccess Control System 2.1/Restore.
•
In the Select Backup directory window, highlight the backup directory you created above and
click OK.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 181
Make sure the directory name does not include any spaces, or the backup
message, click OK.
If you fail to delete the previous ACS Software installation, you will receive the
Backup Succeeded. You may restart
Program uninstalled
ACS Software already installed. Please
Installing ACS
Updating the Windows ACS Software
message, click Finished
Software.