Configuring Mobility Groups; Configuring Radius - Alcatel OmniAccess Wireless System 2.1 Product Manual

Note:
directly to 4012 and 4024 Alcatel OmniAccess WLAN Switch front-panel connectors.
Because the 4102 Alcatel OmniAccess WLAN Appliances operate exclusively in
Appliance
Appliances.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in
OmniAccess Wireless System
Continue with Configuring Mobility

Configuring Mobility Groups

All Alcatel OmniAccess WLAN Switches and Appliances that can communicate with each other through
their Distribution System (network) ports can automatically discover each other and form themselves
into groups. Once they are grouped, the Alcatel OmniVista AirView Software function maximizes its
inter-Alcatel OmniAccess Switch and Appliance processing efficiency and mobility processing, described
in the Client Roaming
Alcatel OmniAccess Switch and Appliance group discovery is automatically enabled when two or more
members are assigned to the same mobility group name. Note that this feature must be enabled on
each Alcatel OmniAccess Switch and Appliance to be included in the discovery process.
•
Use the show mobility summary command to verify the current Alcatel OmniAccess Switch
and Appliance mobility settings.
•
To give a Mobility Group a name, use the following command:
>config mobility group name <group_name>
where <group_name> = Any ASCII character string, up to 31 characters, case sensitive, with
no spaces.
•
To manually add or delete members to a mobility group, use the following commands:
>config mobility group member add <mac-address> <IP addr>
>config mobility group member delete <mac-address> <IP addr>
where <mac-address> is the MAC address and where <IP addr> is the IP Address of the group
member to be added or deleted.
Use the show mobility summary commands to verify that the Alcatel OmniAccess Switch or Appliance
mobility is set up correctly. Continue with

Configuring RADIUS

•
When your Alcatel OmniAccess Wireless System is to use an external RADIUS server for
accounting and/or authentication, set up the links using the following commands. If you are not
configuring RADIUS links at this time, continue with
>config radius acct <address>
>config radius acct <port>
>config radius acct <secret>
>config radius acct [disable/enable]
>config radius auth <address>
>config radius auth <port>
>config radius auth <secret>
>config radius auth [disable/enable]
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 119
Remember that WLAN 17 is only available for Third-Party APs connected
Mode, WLAN 17 cannot be activated for these Alcatel OmniAccess WLAN
does not support WLANs or Third-Party APs.
Groups.
Configuring Mobility Groups
section in the Alcatel OmniAccess Wireless Product
Configuring
Configuring RADIUS
Guide.
RADIUS.
Configuring SNMP.
Configuring Mobility Groups
About the Alcatel