Using Omniaccess Ap 1200 Or 1250 And Omniaccess Ap 1200R Or 1250R Leds - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
Client Reason Code Descriptions and Meanings (Continued)
Client
Reason
Code
8 disassociationStaHasLeft
9 staReqAssociationWithoutAuth
99 missingReasonCode
Client Status Codes
Client Status Codes
The Client Status code may be any of the following:
Table -
Client Status Code Descriptions and Meanings
Client
Status
Code
0 idle
1 aaaPending
2 authenticated
3 associated
4 powersave
5 disassociated
6 tobedeleted
7 probing
8 disabled

Using OmniAccess AP 1200 or 1250 and OmniAccess AP 1200R or 1250R LEDs

OmniAccess AP 1200 or 1250 and OmniAccess AP 1200R or 1250R LEDs
OmniAccess AP 1200 or 1250 and OmniAccess AP 1200R or 1250R LED Conditions and Status
Table -
LED Conditions
Power Alarm
Green ON off
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 196
Description
Description
2.4 GHz 5 GHz
on or off on or off
Meaning
Alcatel OmniAccess Operating System moved the
client to another OmniAccess AP 1200 or 1250
using non-aggressive load balancing
client not authorized yet, still attempting to
associate with an OmniAccess AP 1200 or 1250
client momentarily in an unknown state
Meaning
normal operation -- no rejections of client associ-
ation requests
completing an aaa transaction
802.11 authentication completed
802.11 association completed
client in powersave mode
802.11 disassociation completed
to be deleted after disassociation
client not associated or authorized yet
automatically disabled by Alcatel OmniAccess
Operating System for an operator-defined time
Alcatel OmniAccess Switch or Appliance found,
code OK, normal status.
Troubleshooting Tips
Status
Using