Defaults
Examples
Related Commands
config wlan security web
To change the status of Web authentication used on the wireless LAN, use the config wlan security web
command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs or Third-Party APs.
>config wlan security web [acl/enable/disable] [<WLAN id>/foreignAp] <ACL
name>
Syntax
Defaults
Examples
Related Commands
config wlan security wpa
To change the status of WPA authentication, use the config wlan security wpa command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
WLANs.
>config wlan security wpa [enable/disable] <WLAN id>
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 166
static-wep-key
encryption
<WLAN id>
[40/104/128]
hex/ascii
<key>
<key-index>
N/A
>config wlan security wpa encryption 1 40 hex 0201702001 2
show wlan
config wlan security web
config
wlan
security
web
acl
enable/disable
<WLAN id>
foreignAp
<ACL name>
N/A
>config wlan security web acl 1 ACL03
>config wlan security web enable
>config wlan security web disable
show wlan
config wlan security wpa
config
wlan
security
Static WEP key authentication.
Encryption setting.
WLAN identifier between 1 and 16.
Encryption level.
Key format
Hex or ASCII key
Key index
Configure parameters.
Wireless LAN parameters.
Security policy.
Web authentication.
Add an ACL to the WLAN definition.
Modify status.
WLAN identifier between 1 and 16.
Third-party access point WLAN 17.
Existing ACL name.
Configure parameters.
Wireless LAN parameters.
Security policy.
config wlan security web
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?