Config Ap Disable; Config Ap Enable; Config Ap Get-Crash-Data - Alcatel OmniAccess Wireless System 2.1 Product Manual

Defaults
Examples
Related Commands

config ap disable

config ap disable
To disable an Alcatel OmniAccess AP, use the config ap disable command.
>config ap disable <OmniAccess AP 1200 or 1250>
Syntax
Defaults
Examples
Related Commands

config ap enable

config ap enable
To enable an Alcatel OmniAccess AP, use the config ap enable command.
>config ap enable <OmniAccess AP 1200 or 1250>
Syntax
Defaults
Examples
Related Commands

config ap get-crash-data

To collect the latest crash data for an Alcatel OmniAccess AP, use the config ap get-crash-data
command. Use the transfer upload datatype
OmniAccess Switch or Appliance.
>config ap get-crash-data <OmniAccess AP 1200 or 1250>
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 99
(none)
>config ap delete ac:10:02:72:2f:bf
config 802.11a antenna, config 802.11b antenna
config
ap
disable
<OmniAccess AP 1200 or 1250>Name of the OmniAccess AP 1200 or 1250.
(none)
>config ap disable AP1
config ap enable
config
ap
enable
<OmniAccess AP 1200 or 1250>Name of the OmniAccess AP 1200 or 1250.
(none)
>config ap enable AP1
config ap disable
config ap get-crash-data
command to transfer the collected data to the Alcatel
config
ap
get-crash-data
<OmniAccess AP 1200 or 1250>Name of the OmniAccess AP 1200 or 1250.
(none)
config ap get-crash-data AP3
>
Configure parameters.
OmniAccess AP 1200 or 1250.
Disable command.
Configure parameters.
OmniAccess AP 1200 or 1250.
Enable command.
Configure parameters.
OmniAccess AP 1200 or 1250.
Enable command.
config ap disable