Show Rules - Alcatel OmniAccess Wireless System 2.1 Product Manual

show rules

show rules
To a show the active internal firewall rules, use the show rules command.
>show rules
Syntax
Defaults
Examples
Related Commands
show run-config
show run-config
To a show the routes assigned to the Alcatel OmniAccess Switch or Appliance Service port, use the
show route summary command.
>show route summary
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 45
show rules
(none)
>show rules
None
show route
summary
(none)
>
System Inventory
System Inventory
Switch Description............................... OmniAccess AP 1200 or
1250
Machine Model.................................... OAW-4024
Serial Number.................................... 01012403-10037905-01007
Burned-in MAC Address............................ 00:0B:85:02:0D:20
Gig Ethernet/Fiber Card.......................... Present
Crypto Accelerator............................... Present
System Information
Manufacturer's Name.............................. Alcatel
Product Name..................................... OmniAccess AP 1200 or
1250
Product Version.................................. 2.0.133.0
RTOS Version..................................... 2.0.133.0
Bootloader Version............................... 2.0.133.0
System Name...................................... Pubs01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.45.3.60.1
IP Address....................................... 10.1.44.170
System Up Time................................... 1 days 2 hrs 15 mins 28
secs
Configured Country............................... United States (Legacy)
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +46 C
State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Command action
Command action
Summary information.
show rules