Starting Acs Software As A Windows Service - Alcatel OmniAccess Wireless System 2.1 Product Manual

The start ACS Software script opens a Start ACS Server DOS window, which displays many
Created table
When the Start ACS Server window displays
web server on port 80
CAUTION:
Apache windows, which you can minimize. DO NOT CLOSE any of these windows, or
you can abnormally halt the ACS Software. When you plan to shut down the ACS
Software, refer to
ACS Software Windows
If desired, continue with

Starting ACS Software as a Windows Service

When the ACS Software has been installed as a service, you can start the ACS Software service at any
time.
•
From the Windows START button, select the Programs menu, and select Alcatel
OmniAccess Control System 2.1/Start ACS Service.
The start ACS Software script opens a Start ACS Service DOS window, which displays the
following messages:
The Nms Server service is starting. .
The Nms Server service was started successfully.
Launching Server Status Window
The Start ACS Service window displays the ACS Server Status window. You can close the
Start ACS Service DOS window, and view the current ACS Software Service status in the ACS
Server Status window. When the Start ACS Service window displays the
message, the ACS Software service has started and is ready to host ACS Web Interfaces.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 134
and
Process: Started
, the ACS Software has started and is ready to host ACS Web Interfaces.
The ACS Software may display Start ACS Server, Solid Database, and
Stopping the ACS Software Windows Application
Service.
Starting and Stopping Windows ACS
Starting and Stopping the ACS Web Interface
messages.
Please connect your client (ACS Web Interface) to the
Software.
Starting ACS Software as a Windows Service
or Stopping the
(in the background)
ACS Software is Up