Adding Ssl To The 802.11 Interface - Alcatel OmniAccess Wireless System 2.1 Product Manual

Are you sure you would like to reset the system? (y/n)
System will now restart!
The Alcatel OmniAccess Switch or Appliance completes the bootup process as described in
Step 4: Connecting and Using the CLI Console
Quick Installation
•
Make sure that operators using the Alcatel OmniAccess Switch Web Interface know that they
may securely log into the Alcatel OmniAccess Switch or Appliance using "https://<Alcatel
OmniAccess Switch or Appliance_IPaddress>.
Refer to the Transferring Files To and From an Alcatel OmniAccess Switch or Appliance
file upload and download instructions.

Adding SSL to the 802.11 Interface

When you plan to use a WebAuth certificate to secure the Alcatel OmniAccess Switch or Appliance when
associating new clients, note that the Alcatel OmniAccess Operating System automatically generates its
own local Web Authentication SSL certificate and automatically applies them to the 802.11 Interface.
Verify whether or not the locally-generated Web Authentication certificate is already loaded:
show certificate summary
>
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off
Continue with one of the following two sections to add a
nally-Generated Certificate.
Locally-Generated Certificate
Should you desire to have the Alcatel OmniAccess Operating System generate another Web Authentica-
tion SSL certificate, complete the following:
•
In the CLI, enter:
config certificate generate webauth
>
•
Wait a few seconds, and the Alcatel OmniAccess Switch or Appliance returns:
Web Authentication certificate has been generated
•
Verify that the Web Administration certificate is properly loaded:
show certificate summary
>
Web Administration Certificate................. Locally Generated
Web Authentication Certificate................. Locally Generated
Certificate compatibility mode:................ off
•
Save the SSL certificate, key and secure web password in active working memory to NVRAM
(non-volatile RAM) so your changes are retained across reboots:
save config
>
Are you sure you want to save? (y/n)
Configuration Saved!
•
Reboot the Alcatel OmniAccess Switch or Appliance:
reset system
>
Are you sure you would like to reset the system? (y/n)
System will now restart!
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 128
Guide.
Adding SSL to the 802.11 Interface
Locally-Generated Certificate
in the Alcatel OmniAccess Switch and Appliance
Locally-Generated Certificate
y
Adding SSL to the 802.11 Interface
y
section for other
or an
y
Exter-