Config Aepi; Config Acl - Alcatel OmniAccess Wireless System 2.1 Product Manual

Examples
Related Commands

config aepi

config aepi
To configure External Policy Servers, use the config aepi command. Note that the Standalone WPS
Alcatel OmniAccess Wireless System described in About the Alcatel OmniAccess Wireless System in the
Alcatel OmniAccess Wireless Product Guide does not support ACLs.
config aepi [acl/add/delete/disable/enable] [index]
>
Syntax
Defaults
Examples
Related Commands

config acl

config acl
To configure Access Control Lists, use the config acl command. Note that the Standalone WPS Alcatel
OmniAccess Wireless System described in About the Alcatel OmniAccess Wireless System in the Alcatel
OmniAccess Wireless Product Guide does not support ACLs.
config acl [apply/create/delete/rule] [name]
>
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 73
To have OmniVista AirView Software automatically set the transmit power for
all 802.11b/g OmniAccess Radios at periodic intervals:
>config 802.11a txPower global auto
To have OmniVista AirView Software automatically reset the transmit power for
all 802.11b/g OmniAccess Radios one time:
>config 802.11b txPower global once
To set transmit power for all 802.11b/g OmniAccess Radios to power level 5
(lowest):
>config 802.11b txPower global 5
To set transmit power for 802.11b/g AP1 to global:
>config 802.11b txPower AP1 global
To set transmit power for 802.11b/g AP1 to power level 2:
>config 802.11b txPower AP1 2
show ap config 802.11b, config 802.11a txPower, config country
config aepi
acl
add <index> <IP addr> <port> <secret>
delete <index>
disable <index>
enable <index>
N/A
>config aepi enable acl01
show aepi
config acl
apply <name>
create
delete
rule
Name
Command action.
Configures the AEPI ACL Name.
Configures the External Policy Server.
Deletes the External Policy Server.
Disables the External Policy Server.
Enables the External Policy Server.
Command action.
Applies the ACL (name with up to 32 alphanumeric
characters) to the data path.
Create a new ACL.
Delete an ACL.
Configure rules in the ACL.
ACL name.
config aepi