Alcatel OmniAccess Wireless System 2.1 Product Manual page 263

? command
? command
To display all of the commands in your current level of the command tree, or to display more informa-
tion about a particular command, use the ? command.
>?
>(command name) ?
When you enter a command information request, put a space between the (command name) and the ?
(question mark).
Example 1
Example 2
Example 3
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide
? (at root level)
>
Clear
Config
Debug
Help
Linktest <MAC addr>
Logout
Ping <ip address>
Reset system
Save config
Show
Transfer
shows you all the commands and levels available from the root level.
transfer download d?
>
datatype
shows you that datatype is the only entry at the transfer download level.
transfer download datatype ?
>
<config/code> Enter datatype: config or code.
shows you the permissible entries for the transfer download datatype
command.
Reset the switch or reset configuration to factory
defaults.
Configure switch options and settings.
Manages system debug options.
Help.
Perform a link test to a specified MAC address.
Exit this session. Any unsaved changes are lost.
Send ICMP echo packets to a specified IP address.
Reset options.
Save current switch settings to Non-volatile RAM.
Display switch options and settings.
Transfer a file to or from the switch.
? command
2