Config Advanced 802.11B Channel Foreign - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
config advanced 802.11b factory
•
config advanced 802.11b group-mode
•
config advanced 802.11b logging channel
•
config advanced 802.11b logging coverage
•
config advanced 802.11b logging foreign
•
config advanced 802.11b logging load
•
config advanced 802.11b logging noise
•
config advanced 802.11b logging performance
•
config advanced 802.11b logging txpower
•
config advanced 802.11b monitor coverage
•
config advanced 802.11b monitor load
•
config advanced 802.11b monitor mode
•
config advanced 802.11b monitor noise
•
config advanced 802.11b monitor signal
•
config advanced 802.11b profile clients
•
config advanced 802.11b profile coverage
•
config advanced 802.11b profile customize
•
config advanced 802.11b profile exception
•
config advanced 802.11b profile foreign
•
config advanced 802.11b profile level
•
config advanced 802.11b profile noise
•
config advanced 802.11b profile throughput
•
config advanced 802.11b profile utilization

config advanced 802.11b channel foreign

To have OmniVista AirView Software consider or ignore foreign 802.11b/g interference in making
channel selection updates for all 802.11b/g OmniAccess AP Access Points, use the config advanced
802.11b channel foreign command.
config advanced 802.11b channel foreign [enable/disable]
>
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 85
config
advanced 802.11b
channel
foreign
[enable/disable]
Enabled.
>config advanced 802.11b channel foreign enable
to have OmniVista AirView Software consider foreign 802.11b/g interference
when making channel selection updates for all 802.11b/g OmniAccess AP
Access Points.
config advanced 802.11b channel foreign
config advanced 802.11b channel foreign
Configure parameters.
Advanced 802.11b/g parameters.
OmniVista AirView Software channel selections.
Foreign interference.
Consider or ignore.