Adding A Standalone Building To The Acs Database - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
Repeat this section for any remaining Campus Buildings.
When you have completed this section for all Campus Buildings, continue with
Campus Building.

Adding a Standalone Building to the ACS Database

You can add Buildings to the ACS database whether or not you have added maps or Campuses as
described in Adding a Campus Map to the ACS
To add a building to a Campus in the ACS database, continue with
add an Outdoor Area to a Campus in the ACS database, continue with
Campus. Otherwise, add a standalone building to a Campus by performing the following steps:
•
Select the Monitor Tab.
•
Click Maps to have ACS display the Maps page.
•
In the Button Area, select New Building.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 150
Adding a Standalone Building to the ACS Database
Database.
Adding a Building to a
Configuring the ACS Database
Adding Floor Plans to a
Campus. To
Adding an Outdoor Area to a