External Policy Servers > New; External Policy Servers > Edit - Alcatel OmniAccess Wireless System 2.1 Product Manual

This page displays information about AEPI External Policy Server ACLs. It displays the following
parameters:
•
AEPI ACL Name
•
Server Index
•
Server Address
•
Port
•
Admin Status
•
Server Status
-
The Edit link takes you to the
-
The Remove link allows you to remove the external policy server definition.
-
The Ping link causes Alcatel OmniAccess OS to ping the external policy server.
-
The Stats link takes you to the
Command Buttons
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
New: Select to configure a new external policy server
•
Help: Request that the help page be displayed in a new browser window.
External Policy Servers > New
Use SECURITY/External Policy Server then New... to navigate to this page.
This page allows you to add a new External Policy Server. The following information is required:
•
Server Index (Priority) - Index of the RADIUS server. The Alcatel OmniAccess Switch or
Appliance tries Index 1 first, then Index 2 through 4, in descending order. Set to 1 if your
network is using only one Authentication server.
•
Server IP Address - IP address of the External Policy server.
•
Shared Secret/Confirm Shared Secret - External Policy server login Shared Secret.
•
Port Number - Communication port number for the interface protocols.
Note:
default (1812) or any other port unused by any other application.
•
Admin Status - Set the interface to Enabled or Disabled.
Command Buttons
•
Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.
External Policy Servers > Edit
Use SECURITY/External Policy Servers, then click Edit to navigate to this page.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 99
External Policy Servers > New
DO NOT assign the Port Number to one used by another application. Use the
External Policy Servers > Edit
External Policy Servers > Edit
AEPI Statistics page.
(External Policy Servers >
External Policy Servers > New
page.
New).