Config Ap Wlan; Config Blacklist - Alcatel OmniAccess Wireless System 2.1 Product Manual

Defaults
Examples
Related Commands

config ap wlan

config ap wlan
To enable or disable WLAN Override for an Alcatel OmniAccess AP radio, and to add or delete WLANs to
or from an Alcatel OmniAccess AP radio, as described in the Alcatel OmniAccess Wireless Product Guide,
use the config ap wlan commands.
>config ap wlan [add/delete/enable/disable] [802.11a/802.11b] (WLAN ID)
<OmniAccess AP 1200 or 1250>
Syntax
Defaults
Example
Related Commands

config blacklist

config blacklist
To create or delete an Exclusion List (blacklisted) entry, use the config blacklist command.
>config blacklist [add/delete] <MAC addr> [description]
Syntax
Defaults
Examples
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 103
0 (disabled)
>config ap stats-timer 600 AP2
config ap disable
config
ap
wlan
enable/disable/
add/delete
802.11a/802.11b
(WLAN ID)
<OmniAccess AP 1200 or 1250>OmniAccess AP 1200 or 1250 name.
(none)
>config ap wlan enable 802.11a AP03
to enable WLAN Override on the AP03 802.11a radio.
>config ap wlan add 802.11a 1 AP03
to add WLAN ID 1 on the AP03 802.11a radio.
>config ap wlan delete 802.11a AP03
to delete WLAN ID 1 from the AP03 802.11a radio.
>config ap wlan disable 802.11a AP03
to disable WLAN Override on the AP03 802.11a radio.
show ap wlan
config blacklist
add/delete
MAC addr
description
(none)
>config blacklist add 0:0b:85:01:18:b0 lab
>config blacklist delete 0:0b:85:01:18:b0 lab
Configure parameters.
OmniAccess AP 1200 or 1250.
Reset command.
Enable or disable WLAN Override mode.
Add or delete a WLAN override. (OmniAccess AP
1200 or 1250 must have WLAN Override enabled to
add or delete a WLAN.)
802.11a or 802.11b/g radio.
Optional Alcatel OmniAccess Switch or Appliance ID
assigned to a WLAN.
Configure the Exclusion List.
Creates/deletes a local Excluded entry.
MAC address of the local Excluded entry.
Sets the description for a Excluded entry.
config ap wlan