•
show advanced 802.11b summary
show advanced 802.11b channel
To display the automatic channel assignment status and statistics, use the show advanced 802.11b
channel command.
show advanced 802.11b channel
>
Syntax
Defaults
Examples
Related Commands
show advanced 802.11b group
To display the advanced 802.11b/g OmniAccess Radio RF grouping, use the show advanced 802.11b
group command.
show advanced 802.11b group
>
Syntax
Defaults
Examples
Related Commands
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 12
show advanced 802.11b channel
show
advanced
802.11b
channel
(none)
>show advanced 802.11b channel
Automatic Channel Assignment
Channel Assignment Mode........................ OFF
Channel Update Interval........................ 600 seconds
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... 00:0b:85:02:0d:20
Last Run....................................... 157 seconds ago
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
config 802.11b channel
show advanced 802.11b group
show
advanced
802.11b
group
(none)
>show advanced 802.11b group
Radio RF Grouping
802.11b Group Mode.............................. AUTO
802.11b Group Update Interval................... 600 seconds
802.11b Group Leader............................ a5:6b:ac:10:01:6b
802.11b Group Member.......................... a5:6b:ac:10:01:6b
802.11b Last Run................................ 511 seconds ago
config advanced 802.11b group-mode
Display configurations.
Advanced parameters.
802.11b/g network.
Channel status.
Display configurations.
Advanced parameters.
802.11b/g network.
RF grouping values.
show advanced 802.11b channel
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?