Radius Authentication Servers > Edit; Radius Accounting Servers; Radius Accounting Servers > New - Alcatel OmniAccess Wireless System 2.1 Product Manual

RADIUS Authentication Servers > Edit
Use SECURITY/AAA/RADIUS Authentication then Edit to navigate to this page.
This page allows you to change the following parameters on an existing Remote Authentication Dial-In
User Servers:
•
Server Shared Secret/Confirm Shared Secret - RADIUS server login Shared Secret.
•
Server Status - Set the interface to enabled or disabled.
Command Buttons
•
Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.

RADIUS Accounting Servers

Use SECURITY/AAA/RADIUS Accounting to navigate to this page.
This page displays Server Index, Server Address, Port and Admin Status information for your existing
Remote Accounting Dial-In User Servers.
•
Server Index - The RADIUS server Index. The Alcatel OmniAccess Switch or Appliance tries
Index 1 first, then Index 2 through 4, in descending order. Should be 1 if your network is using
only one Accounting server.
•
Server Address - IP address of the RADIUS server.
•
Port - Alcatel OmniAccess Switch or Appliance port number for the interface protocols.
•
Admin Status - Whether the interface is enabled or disabled.
•
The Edit link opens the
•
The Remove link allows you to delete an existing RADIUS Accounting server.
•
Click the Ping link to send ping packets to the RADIUS Server to verify that you have a working
connection between the Alcatel OmniAccess Switch or Appliance and the RADIUS Server
Command Buttons
•
New: Select to add a new RADIUS Accounting server
•
Help: Request that the help page be displayed in a new browser window.
RADIUS Accounting Servers > New
Use SECURITY/AAA/RADIUS Accounting then New... to navigate to this page.
This page allows you to add a new Remote Accounting Dial-In User Server. The following information is
required:
•
Server Index (Priority) - Index of the RADIUS server. The Alcatel OmniAccess Switch or
Appliance tries Index 1 first, then Index 2 through 4, in descending order. Set to 1 if your
network is using only one Accounting server.
•
Server IP Address - IP address of the RADIUS server.
•
Shared Secret/Confirm Shared Secret - RADIUS server login Shared Secret.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 89
RADIUS Authentication Servers > Edit
RADIUS Accounting Servers
RADIUS Accounting Servers > Edit
RADIUS Accounting Servers > New
RADIUS Authentication Servers > Edit
page.
(RADIUS Accounting Servers > New).