Configure Historically Known Rogue Ap > Rogue Ap <Macaddr - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
Configure <IPaddr> > Local Net User
•
Configure Audit Report > Local Net Users > <name>
•
Monitor Manually Disabled Clients > Template <MACaddr>
•
Configure MAC Filter Templates > Template <MACaddr>
•
Configure <IPaddr> MAC Filter
•
Configure <IPaddr> > MAC Filter Parameters
•
Configure <IPaddr> > Manually Disabled Clients
•
Configure <IPaddr> > CA Certification
•
Configure <IPaddr> > Switch 802.11
•
Configure <IPaddr> > 802.11a Parameters
•
Configure <IPaddr> > 802.11a RRM Thresholds
•
Configure <IPaddr> > 802.11a RRM Intervals
•
Configure <IPaddr> > 802.11a Grouping Control
•
Configure <IPaddr> > 802.11b/g Parameters
•
Configure <IPaddr> > 802.11b/g RRM Thresholds
•
Configure <IPaddr> > 802.11b/g RRM Intervals
•
Configure <IPaddr> > 802.11b/g RRM Grouping Control
•
Configure <IPaddr> > Ports
•
Configure <IPaddr> > Ports > <port#>
•
Configure <IPaddr> > Ports > <#>
•
Configure <IPaddr> > Trap Receiver Edit
•
Configure <IPaddr> > Trap Controls
•
Configure <IPaddr> > Telnet SSH Configuration
•
Configure <IPaddr> > Syslog Configuration
•
Configure <IPaddr> > WEB Admin
•
Monitor Email Notification for '<alarm category>'
•
Configure TFTP Server > TFTP Server <name>
•
Monitor Calibration Model > <model> > Apply to Floors
•
Configure AP Template > Apply to APs
•
Configure Radio Template > Apply to Radios
•
Configure Template > <template> > Apply to Switches
Configure Historically Known Rogue AP > Rogue AP <MACaddr>
Use CONFIGURE/Templates, from the left sidebar menu select Known Rogues, click a MAC
Address entry to access this page.
This page allows you to add a Historically Known Rogue AP to the ACS Web Interface database:
•
MAC address: IP Address of the rogue access point (read only).
11/5/04 Configure Historically Known Rogue AP > Rogue AP <MACaddr>
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 167
Configure Historically Known Rogue AP > Rogue AP <MACaddr>