Configure <Ipaddr> > Network Route; Configure <Ipaddr> > Mobility Group <Name> > Group Members - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
IP Address: IP Address of the interface.
Select a command
•
Add Interface: Click GO and refer to
•
Delete Dynamic Interfaces: Select a dynamic interface to be deleted, select this command and
click GO.
Configure <IPaddr> > Network Route
Use CONFIGURE/Switches and click an IP address under the IP Address column, then on the left
sidebar menu, select System and click Network Route, then click on a list item from IP Address
column to access this page.
This page allows you to view a list of network routes for this Alcatel OmniAccess Switch or Appliance
Service Port.
•
Checkbox: Select the Network Route to delete before using the Delete Network Routes
command.
•
IP Address: IP Address of the Route.
•
IP Netmask: Network Mask of the Route.
•
Gateway IP Address: Gateway IP Address of the Route.
Select a command
•
Add Network Route: Click GO and refer to
•
Delete Network Routes: Select Network Route(s) to be deleted, select this command and click
GO.
Configure <IPaddr> > Mobility Group <name> > Group Members
Use CONFIGURE/Switches and click an IP address under the IP Address column, on the left sidebar
menu, click System/Mobility Groups to access this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
Mobility Groups.
This page allows you to view, add or delete mobility group members.
•
Checkbox: Use this to select a group member.
•
Switch Name: User-defined Alcatel OmniAccess Switch or Appliance name.
•
Member MAC Address: MAC address of the mobility group member.
•
Member IP Address: DS Port IP Address of the mobility group member.
Select a command
•
Add Group Members: Select this command and click GO. Refer to
Mobility Group
•
Delete Group Members: To delete a group member, highlight a checkbox, select this command,
and click GO.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 66
Configure <IPaddr> >
<name>.
Configure <IPaddr> > Network Route
Interface.
Configure <IPaddr> > Network Route
Configure <IPaddr> > Add Network Route.
Configure <IPaddr> > Mobility Group <name> > Group Members
Configure <IPaddr> >