Config Trapflags Linkmode; Config Trapflags Multiusers; Config Trapflags Rogueap; Config Trapflags Rrm-Params - Alcatel OmniAccess Wireless System 2.1 Product Manual

config trapflags linkmode

To enable or disable Alcatel OmniAccess Switch or Appliance level Link Up/Down trap flag, use the
config trapflags linkmode command.
>config trapflags linkmode [enable/disable]
Syntax
Defaults
Examples
Related Commands

config trapflags multiusers

To enable or disable sending traps when multiple logins active, use the config trapflags multiusers
command.
>config trapflags multiusers [enable/disable]
Syntax
Defaults
Examples
Related Commands

config trapflags rogueap

To enable or disable sending Rogue AP detection traps, use the config trapflags rogueap command.
>config trapflags rogueap [enable/disable]
Syntax
Defaults
Examples
Related Commands

config trapflags rrm-params

To enable or disable sending RRM profile related traps, use the config trapflags rrm-params command.
>config trapflags rrm-params [enable/disable]
Syntax
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 150
config trapflags linkmode
config
trapflags
linkmode
[enable/disable]
Enabled
>config trapflags linkmode disable
show trapflags
config trapflags multiusers
config
trapflags
multiusers
[enable/disable]
Enabled
>config trapflags multiusers disable
show trapflags
config trapflags rogueap
config
trapflags
rogueap
[enable/disable]
Enabled
>config trapflags rogueap disable
show trapflags
config trapflags rrm-params
config
Configure parameters.
Trap parameters.
Link status flag.
Modify the state of the parameter.
Configure parameters.
Trap parameters.
Multiple user flag.
Modify the state of the parameter.
Configure parameters.
Trap parameters.
Rogue AP detection trap flag.
Modify the state of the parameter.
Configure parameters.
config trapflags linkmode