Related Commands
config interface address
To configure an interface's address information, use the config interface address command.
>config interface address [ap-manager <ipaddress>/management <addr> <netmask>
<gateway>/service port <addr> <netmask>/virtual <addr>] <interface-name>
Syntax
Defaults
Examples
Related Commands
config interface create
To add a new dynamic interface, use the config interface create command.
>config interface create <interface-name> <vlan-id>
Syntax
Defaults
Examples
Related Commands
config interface delete
To delete a dynamic interface, use the config interface delete command.
>config interface delete <interface-name>
Syntax
Defaults
Examples
Related Commands
config interface dhcp
To configure DHCP options on an interface, use the config interface dhcp command.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 107
show interface
config interface address
config interface address
ap-manager <IP address>Configures the AP Manager interface.
management <addr>
<netmask> <gateway>
service-port <addr>
<netmask>
virtual <addr>
<interface-name>
N/A
>config interface address ap-manger 172.168.2.3
show interface
config interface create
config interface create
<interface-name>
<vlan-id>
N/A
>tbd
show interface
config interface delete
config interface delete
<interface-name>
N/A
>config interface delete VLAN501
show interface
config interface dhcp
Command action.
Configures the management interface.
Configures the out-of-band service Port.
Configures the virtual gateway interface.
Enter interface name.
Command action
Interface name.
VLAN id.
Command action.
Interface name.
config interface address