Configure Radius Authentication Server Template > Template <Name - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
IPSec Parameters (Available only when IPSec is selected under Layer 3 Security)
Parameter
IPSec Authentication
IPSec Encryption
IKE Authentication
IKE Phase1
Lifetime (seconds)
IKE Diffle Hellman Group
When you select XAuth Pre Shared Key, the key must be at least eight bytes to interoperate
Note:
with Cisco clients. Other tested clients function with a key of less than eight bytes.
Command Buttons
•
Save
•
Apply to Switches
•
Delete
•
Cancel
Configure RADIUS Authentication Server Template > Template <name>
<name>
Use CONFIGURE/Templates, from the left sidebar menu, under Security select Radius Auth
Servers, then click a Template Name item to access this page.
This page allows you to edit RADIUS authentication server information and apply this information to
Alcatel OmniAccess Switches and Appliances.
Table -
General
Parameter
Template Name
Server Address
No. of Switches Applied To
Port Number
Shared Secret
Confirm Shared Secret
Admin Status
11/5/04 Configure RADIUS Authentication Server Template > Template <name>
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 172
None, HMAC-MD5, HMAC-SHA1.
DES3, None, AES-CBC, DES.
Displays a radio button for selection of Type (Certificate, Pre-Shared
Key, XAuth Pre-Shared Key) and Key (Note).
Aggressive, Main.
Timeout in seconds.
Group 1 (768 bits), Group 2 (1024 bits), Group 3 (1536 bits).
Operator-defined RADIUS authentication server name.
IP Address of RADIUS authentication server (read only).
Number of Alcatel OmniAccess Switches and Appliances to which this
template is applied (read only).
Port number for the interface protocols (read only).
RADIUS server login Shared Secret (text field).
Confirmation of Shared Secret (text field).
The state of the server, enabled or disabled (checkbox).
Description
Description
Configure RADIUS Authentication Server Template > Template