Alcatel OmniAccess Wireless System 2.1 Product Manual page 900

Alcatel OmniAccess Switch and Appliance Quick Installation
This Guide contains several sections allowing you to install an Alcatel OmniAccess WLAN Switch or
Appliance:
•
Overview
•
Step 1: Collecting Required Tools and Information
•
Step 2: Determining a Location
•
Step 3: Installing the Chassis
•
Step 4: Connecting and Using the CLI Console
•
Step 5: Performing Power On Self Test
•
Step 6: Using the Startup Wizard
•
Step 7: Logging In
•
Step 8: Connecting the Network (Distribution System)
•
Step 9: Connecting the Service Port Interfaces
•
Step 10: Connecting Access Points
•
Step 11: Where to Go from Here
FCC Statements for Alcatel OmniAccess Switches and Appliances
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Model 4012 and 4024 PoE Alcatel OmniAccess WLAN Switches are only intended for installation in Envi-
ronment A (same-building deployment) as defined in IEEE 802.3af. All interconnected equipment must
be contained within the same building including the interconnected equipment's associated LAN
connections.
Safety Considerations
•
The OAW-GSX and OAW-GSX2 Network Adapter Modules and OAW-4102 Alcatel OmniAccess
WLAN Appliances contain Class 1 Lasers (Laser Klasse 1) according to EN 60825-1+A1+A2.
11/5/04
90-100831-300 Rev 2
Guide
Safety Considerations
Alcatel OmniAccess Switch and Appliance Quick Installation Guide
© 2004 All Rights Reserved.
System Release 2.1
FCC Statements for Alcatel OmniAccess Switches and Appliances