Show L2Tp; Show Load-Balancing; Show Loginsession; Show Macfilter - Alcatel OmniAccess Wireless System 2.1 Product Manual

show l2tp

show l2tp
To display L2TP sessions, use the show l2tp command.
show l2tp
>
Syntax
Defaults
Examples
Related Commands

show load-balancing

To display the status of the load-balancing feature, use the show load-balancing command.
>show load-balancing
Syntax
Defaults
Examples
Related Commands

show loginsession

To display the existing sessions, use the show loginsession command.
>show loginsession
Syntax
Defaults
Examples
Related Commands

show macfilter

show macfilter
To display the MAC filter parameters, use the show macfilter commands. The MAC delimiter (none,
colon, or hyphen) for MAC addresses sent to RADIUS servers is displayed. The MAC filter table lists the
clients that are always allowed to associate with a WLAN.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 32
show
summary
<LAC IP addr>
(none)
>show l2tp summary
LAC_IPaddr LTid LSid RTid RSid ATid State
---------- ---- ---- ---- ---- ---- -----
None
show load-balancing
show
load-balancing
Enabled
>show load-balancing
Aggressive Load Balancing...................... Enabled
config load-balancing
show loginsession
show
loginsession
(none)
>show loginsession
ID User Name Connection From
-- --------------- ---------------
00 admin 172.18.4.84
config loginsession close
Display configurations.
Displays all L2TP sessions.
Displays a L2TP session.
Display configurations.
Status load-balancing.
Display configurations.
Current session details.
Idle Time
------------
00:00:00
Session Time
------------
01:08:18
show l2tp