Table -
Client Properties (Continued)
Parameter
WEP State
Command Buttons
•
Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Link Test: Use the built-in test circuitry to test the link between the client and the Alcatel
OmniAccess Switch or Appliance.
•
Remove: Disconnect the client.
•
Help: Request that the help page be displayed in a new browser window.
RADIUS Servers
RADIUS Servers
Use MONITOR/Wireless/RADIUS Servers to navigate to this page.
This page displays addressing and status information for your Remote Authentication Dial-In User
Servers. Configure the authentication and accounting servers by selecting the Security option from the
Menu Bar.
Table -
Authentication Servers and Accounting Servers Status
Parameter
Index
Address
Port
Admin Status
Select the Stats... link to display the statistics page for the selected server
tication Stats
or
RADIUS Servers > Accounting
Command Buttons
•
Help: Request that the help page be displayed in a new browser window.
RADIUS Servers > Authentication Stats
Use MONITOR/Wireless/RADIUS Servers then Stats... in a RADIUS Authentication entry to
navigate to this page.
This page displays addressing and status information for your Remote Authentication Dial-In User
Servers as follows.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 28
WEP security state of the client.
Access priority number for RADIUS servers. Up to four Authentication
and four Accounting servers can be configured, and Alcatel OmniAccess
Switch or Appliance polling of the servers starts with Index 1, Index 2
second, and so forth. Index number is based on when the RADIUS server
is added to the Alcatel OmniAccess Switch or Appliance.
IP address of the RADIUS server.
Communication port.
Enabled or disabled.
Stats).
RADIUS Servers > Authentication Stats
Description
Description
(RADIUS Servers > Authen-
RADIUS Servers
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?
Questions and answers