Radius Accounting Servers > Edit; Local Net Users; Local Net Users > New - Alcatel OmniAccess Wireless System 2.1 Product Manual

•
Port Number - Port number for the interface protocols.
Note:
default (1813) or any other port unused by any other application.
•
Server Status - Set the interface to enabled or disabled.
Command Buttons
•
Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.
RADIUS Accounting Servers > Edit
Use SECURITY/AAA/RADIUS Accounting then New... to navigate to this page.
This page allows you to change the following parameters on an existing Remote Accounting Dial-In
User Server:
•
Server Shared Secret/Confirm Shared Secret - RADIUS server login Password.
•
Server Status - Set the interface to enabled or disabled.
Command Buttons
•
Back: Return to the previous window.
•
Apply: Data is sent to the Alcatel OmniAccess Switch or Appliance and made to take effect, but
not preserved across a power cycle; these parameters are stored temporarily in volatile RAM.
•
Help: Request that the help page be displayed in a new browser window.

Local Net Users

Local Net Users
Use SECURITY/AAA/Local Net Users to navigate to this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support local
net users.
This page presents a summary of the existing local network users who are allowed to access a specific
Alcatel WLAN sorted by User Name. This is an administrative bypass of the RADIUS authentication
process. Layer 3 Web Authentication located on the
Client information is passed to the RADIUS authentication server first, and if the client information does
not match a RADIUS database entry, this local database is polled. Clients located in this database are
granted access to network services if the RADIUS authentication fails or does not exist.
•
Use the Remove link to remove an existing local network client.
Command Buttons
•
New: Select to add a new local network client
•
Help: Request that the help page be displayed in a new browser window.
Local Net Users > New
Use SECURITY/AAA/Local Net Users then New... to navigate to this page.
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 90
DO NOT assign the Port Number to one used by another application. Use the
RADIUS Accounting Servers > Edit
Local Net Users > New
WLANs > Edit page must be enabled.
(Local Net Users >
RADIUS Accounting Servers > Edit
New).