Configure 802.11A Rrm Intervals Template; Configure 802.11B/G Parameters Templates - Alcatel OmniAccess Wireless System 2.1 Product Manual

Table -
802.11a RRM Thresholds (Continued)
Parameter
RF Utilization
No of Switches Applied To
Select a command:
•
Add Template: Refer to

Configure 802.11a RRM Intervals Template

Use CONFIGURE/Templates, and from the left sidebar menu under 802.11a select RRM Intervals
to access this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
AireView Director (RRM) thresholds.
This page allows you to view 802.11a RRM intervals thresholds for a template:
•
Template Name: User-defined name of this template. Click a list item. Refer to
802.11a RRM Intervals > Template
•
Signal Measurement Interval: The interval (in seconds) for strength measurements at each
OmniAccess AP 1200 or 1250. Default is 300 seconds.
•
Noise Measurement Interval: The interval (in seconds) for noise and interference measure-
ments at each OmniAccess AP 1200 or 1250. Default is 300 seconds.
•
Load Measurement Interval: The interval (in seconds) for load measurements at each
OmniAccess AP 1200 or 1250. Default is 300 seconds.
•
Coverage Measurement Interval: The interval (in seconds) for coverage measurements at each
OmniAccess AP 1200 or 1250. Default is 300 seconds.
•
No of Switches Applied To: Number of Alcatel OmniAccess Switches and Appliances to which
this template is applied.
Select a command:
•
Add Template: Refer to

Configure 802.11b/g Parameters Templates

Use CONFIGURE/Templates, and from the left sidebar menu select 802.11b/g Parameters to
access this page.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
802.11b/g parameters.
This page displays the 802.11b/g parameters templates:
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 95
802.11a RF utilization threshold between 0 and 100 percent.
Number of Alcatel OmniAccess Switches and Appliances to which this
parameter is applied (read only).
Configure 802.11a RRM Thresholds > New
<name>.
Configure 802.11a RRM Intervals > New
Configure 802.11a RRM Intervals Template
Description
Template.
Configure 802.11a RRM Intervals Template
Template.
Configure 802.11b/g Parameters Templates
Configure