Show Rogue Ap Commands; Show Rogue Ap Summary; Show Rogue Ap Detailed - Alcatel OmniAccess Wireless System 2.1 Product Manual

Defaults
Examples
Related Commands

SHOW ROGUE AP COMMANDS

Use the following Rogue AP commands:
•

show rogue ap detailed

•

show rogue ap summary

show rogue ap detailed
To show details of a rogue access point detected by the Alcatel OmniAccess Switch or Appliance, use
the show rogue-ap detailed command.
>show rogue ap detailed <MAC address>
Syntax
Defaults
Examples
Related Commands
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 41
(none)
show radius summary
>
Vendor Id Backward Compatibility................. Enabled
Call Station Id Type............................. IP Address
Authentication Servers
Index Server Address
----- ---------------------------------------------- ------ --------------
1 10.1.3.10
Servers
Index Server Address
----- ---------------------------------------------- ------ --------------
1 10.1.3.10
show radius auth statistics, show radius acct statistics
show rogue ap
show rogue ap detailed
show
rogue ap
detailed
<MAC address>
(none)
show rogue ap detailed 00:40:96:90:d1:6a
>
Rogue MAC Address.............................. 00:40:96:90:d1:6a
State.......................................... Alert
First Time Rogue was Reported.................. Sat Aug
Last Time Rogue was Reported................... Sat Aug
Reported By
AP 1
MAC Address............................ 00:0b:85:01:88:b0
Name................................... AP1
Radio Type............................. 802.11b
SSID................................... Chichen
Channel................................ 6
RSSI................................... -60 dBm
SNR.................................... 40 dB
show rogue ap summary
Display configurations.
Rogue access points.
Summary information.
AP MAC address.
show rogue ap
Port State
1812 Accounting
Port State
1813 Enabled
9 15:48:50 2003
9 21:16:50 2003