Table of Contents
Advertisement
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
Third-Party AP port mirroring.
>show mirror ap
Syntax
Defaults
Examples
Related Commands
show mirror foreignap
To view the Third-Party APs whose transmit and receive data appears on the Mirror Port (see
mirror
port) for troubleshooting, use the show mirror foreignap command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
Third-Party AP port mirroring.
>show mirror foreignap
Syntax
Defaults
Examples
Related Commands
show mirror mac
show mirror mac
To view the clients whose transmit and receive data appears on the Mirror Port (see
by MAC address, use the show mirror mac command.
Note that the Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support client
port mirroring.
>show mirror mac
Syntax
Defaults
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 34
show
mirror
ap
(none)
>show mirror ap
AP
-----------------
AP3
config mirror ap, show mirror foreignap, show mirror mac, show mirror port
show mirror foreignap
show
mirror
foreignap
(none)
>show mirror foreignap
Foreign AP Port
---------------
2
config mirror foreignap, show mirror ap, show mirror mac, show mirror port
show
mirror
mac
(none)
Configure parameters.
Mirror command.
OmniAccess AP 1200 or 1250.
Configure parameters.
Mirror command.
Third-Party Access Point.
Configure parameters.
Mirror command.
Client MAC address.
show mirror foreignap
config
config mirror
port)
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the OmniAccess Wireless System 2.1 and is the answer not in the manual?