Alcatel OmniAccess Wireless System 2.1 Product Manual page 765

Table -
Client Related Traps
Trap Name
802.11 Disassociation
802.11
Deauthentication
802.11 Failed
Authentication
802.11 Failed
Association
Excluded
The Standalone WPS Alcatel OmniAccess Wireless System described in About the Alcatel
Note:
OmniAccess Wireless System in the Alcatel OmniAccess Wireless Product Guide does not support
voice or data clients.
Table -
OmniAccess AP 1200 or 1250 Traps
Trap Name
AP Register
AP Interface Up/Down
Table -
Auto RF Profile Traps
Trap Name
Load Profile
Noise Profile
Interference Profile
Coverage Profile
11/5/04
90-100831-300 Rev 2Alcatel OmniAccess Wireless Access Point Quick Installation Guide 186
The disassociate notification is sent when the client sends a disassociation
frame.
The deauthenticate notification is sent when the client sends a deauthenti-
cation frame.
The authenticate failure notification is sent when the client sends an
authentication frame with a status code other than 'successful'.
The associate failure notification is sent when the client sends an associ-
ation frame with a status code other than 'successful'.
The associate failure notification is sent when a client is excluded.
Notification sent when OmniAccess AP 1200 or 1250 associates or disas-
sociates with the Alcatel OmniAccess Switch or Appliance.
Notification sent when OmniAccess AP 1200 or 1250 interface (802.11a or
802.11b/g) status goes up or down.
Notification sent when Load Profile state changes between PASS and FAIL.
Notification sent when Noise Profile state changes between PASS and
FAIL.
Notification sent when Interference Profile state changes between PASS
and FAIL.
Notification sent when Coverage Profile state changes between PASS and
FAIL.
Configure Trap Controls > Template <name>
Description (Note)
Description
Description