Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual page 51

3
4
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
Test some commands on the instrument:
Right- click on the instrument and choose Send Commands To This
a
Instrument from the popup menu.
In the Agilent Interactive IO application, enter commands in the
b
Command field and press Send Command, Read Response, or Send&Read.
Choose Connect>Exit from the menu to exit the Agilent Interactive IO
c
application.
In the Agilent Connection Expert application, choose File>Exit from the
menu to exit the application.
2
Setting Up
51