21
:MTESt Commands
:MTESt:COUNt:FWAVeforms
Query Syntax
:MTESt:COUNt:FWAVeforms? [CHANnel<n>]
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:COUNt:FWAVeforms? query returns the total number of failed
waveforms in the current mask test run. This count is for all regions and
all waveforms collected on the channel specified by the optional parameter
or collected on the currently specified source channel (:MTESt:SOURce) if
there is no parameter.
Return Format
<failed><NL>
<failed> ::= number of failed waveforms in NR1 format.
See Also
•
•
•
•
•
Example Code
•
388
(see
page
790)
"Introduction to :MTESt Commands"
":MTESt:COUNt:WAVeforms"
":MTESt:COUNt:TIME"
":MTESt:COUNt:RESet"
":MTESt:SOURce"
on page 409
"Example Code"
on page 379
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 379
on page 391
on page 390
on page 389