atm-vp qos-parameter
Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
atm-vp vpi qos-parameter qosParameterInstanceName qosParameterInstanceValue
no atm-vp vpi qos-parameter qosParameterInstanceName
Command introduced in JunosE Release 7.1.0.
Attaches a QoS parameter instance to the specified VP on the ATM major interface. The
no version detaches the parameter instance from the specified VP.
vpi—Virtual path identifier of this PVC; number in the range 0–255
qosParameterInstanceName—Name of the parameter instance that you want to attach
to the VP
qosParameterInstanceValue—Number of the scheduler rate for the parameter instance;
the default value is the minimum value defined in the parameter definition
Interface Configuration
Creating Parameter Instances
Chapter 2: A Commands
189